Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Flushing: What to Know First
We provide independent Olympia Chimney chimney repair in Flushing, with most jobs completed in a single visit and upfront pricing agreed before we start. Typical turnaround from call to repair is two to five business days, depending on parts. We don’t guess at what’s wrong, and we don’t recommend work you can’t see for yourself.
This page is for Flushing homeowners who have an Olympia Chimney liner, cap, or component showing wear, and who want a technician who knows the difference between a 316-alloy flex liner and a 304, and why that matters for your warranty. We’ve been answering calls with a live person 24 hours a day for over 42 years. If you’re seeing water stains near your fireplace, crumbling mortar, or a cap that doesn’t sit square anymore, call us at (516) 206-6672 for a free estimate.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney 316Ti flexible liner: creosote pinholing at the flex joints. The titanium-stabilized alloy resists corrosion well, but in Flushing’s freeze-thaw cycles, the accordion folds at the flex joints collect condensate that acidic creosote turns into pinholes. We section-scan with our camera to locate the breach, then splice in a matching Olympia 316Ti section or transition to a rigid DuraFlex liner if the damage is extensive. We document pre- and post-repair photos for your records.
- Olympia Chimney Gelco-style cap: base rail rust-through at the weld seams. The powder-coated steel base rail on older Gelco-labeled Olympia caps traps moisture at the corner welds, especially on south-facing chimneys in Flushing that bake all afternoon. We source a replacement Gelco cap with an upgraded 304 stainless base rail, or fabricate a custom Copperfield cap if your flue size is non-standard. The new cap gets sealed with a bead of high-temp silicone, not just gravity-seated.
- Olympia Chimney HeatShield-compatible flue: ceramic coating delamination above the smoke shelf. When a previous installer used HeatShield cerfractory mix over an Olympia liner without proper surface prep, the coating flakes off in sheets above the smoke shelf where temperatures spike. We grind back to sound substrate, reapply HeatShield per OEM spec, and fire-cure it with a controlled burn before we leave. No shortcuts on cure time.
- Olympia Chimney masonry crown: hairline fractures from thermal shock. The pre-formed concrete crowns that shipped with some Olympia systems in the 2000s develop radial cracks after repeated heating and cooling. In Flushing’s climate, water gets in, freezes, and lifts the crown off the brick in three winters. We pour a new crown with a proper drip edge and expansion joint, or install a Gelco copper crown wash if the homeowner wants a permanent solution.
- Olympia Chimney DuraFlex transition: collar separation at the appliance adapter. The crimped collar where DuraFlex flex meets a rigid Olympia tee or thimble can work loose if the appliance vibrates, wood stoves especially. We’ve found this on three Flushing homes near Kissena Park where the original installer didn’t use a locking band. We reseat with a stainless locking band and add a support bracket so the flex doesn’t carry the appliance’s weight.
Our Olympia Chimney Chimney Repair Process
- 1
Call and schedule. A live person answers, 24 hours a day. We ask what you’re seeing, what Olympia Chimney product you have if you know it, and book a Level-2 camera inspection.
- 2
Camera inspection and documentation. Our tech runs a camera the full flue length, photographs every defect, and explains the findings in plain English. You see the same images we see. No hidden damage, no phantom repairs.
- 3
Parts decision: OEM or quality aftermarket. We stock common Olympia Chimney components, DuraFlex sections, HeatShield mix, and Gelco caps. If your repair needs a discontinued Olympia part, we source a compatible Copperfield or Famco equivalent and tell you before we order. As an independent Olympia Chimney service provider, we’re free to recommend what works, not just what carries a logo.
- 4
Repair with the right materials. We use professional-grade products from the brands we trust: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. No builder-grade substitutes. The tech who diagnosed the job does the repair.
- 5
Post-repair test and photo record. We run another camera pass, do a smoke test or draft test as appropriate, and give you a photo report. The 90-Day Done Right Promise goes in writing before we leave.
- 6
Cleanup and final walkthrough. We haul away debris, lay down fresh drop cloths, and review the work with you. The number on the estimate is the number on the invoice.
What Olympia Chimney Chimney Repair Costs in Flushing
Most Olympia Chimney repairs in Flushing fall between these ranges:
- Cap replacement (Gelco or Copperfield): $280 - $520
- Mortar repointing / tuckpointing (10-30 sq ft): $450 - $890
- Flashing repair or replacement: $380 - $740
- Crown repair (crack seal): $340 - $580
- Crown rebuild (pour new): $720 - $1,400
- Liner section repair or splice (316Ti): $580 - $1,100
- Full liner replacement (DuraFlex or Olympia rigid): $2,400 - $4,800
- Chimney rebuild (partial, above roofline): $3,200 - $6,500
What moves the price: accessibility (steep roof, tight alley), extent of hidden water damage we find during inspection, and whether the part is in stock or special-order. We agree on a flat price before booking the repair. Estimates are free. Call (516) 206-6672 for an exact quote on your Olympia Chimney system.
Why Flushing Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been serving Flushing for years, including the older brick row houses around Kissena Park where chimneys that look fine from the street hide some of the most stubborn creosote buildups Russell Haines has ever pulled from a flue. Our techs know Olympia Chimney products specifically, not just chimneys in general. When an Olympia 316Ti liner fails, we know whether it’s a warranty issue, an installation defect, or simple end-of-life wear, and we’ll tell you straight.
The 90-Day Done Right Promise means if it’s not right, we come back. In writing, no arguing. Most jobs finish in one visit. Background-checked, uniformed technicians. A live person on the phone, every hour of every day. And when an Olympia part isn’t the best solution, we have DuraFlex, HeatShield, and Gelco in the truck, ready.
A clean flue isn’t a luxury. It’s just the job done right.
FAQs
No, independent repair by a qualified technician does not automatically void your Olympia Chimney warranty. The warranty covers defects in materials and workmanship from the factory, not damage from use, weather, or poor installation. We document our repairs with photos and parts serial numbers so any future warranty claim with Olympia remains clean. If your liner is still under factory warranty and the failure is clearly a material defect, we’ll flag that and advise you on the OEM claim process. Call (516) 206-6672 and we’ll check your install date against the warranty period.
Common Olympia Chimney caps, flex liner sections, and adapters are in our Flushing-area warehouse or on the truck, so same-day or next-day is typical. Discontinued Olympia parts, or sizes from older series, may take three to five business days to source from our distributor network. We stock compatible DuraFlex, Gelco, and Copperfield equivalents for most applications, so we rarely leave a chimney unsafe while waiting. We’ll tell you the lead time before you book the repair.
Repair if the damage is localized, a few inches of pinholing or a single joint separation, and the liner is under fifteen years old. Replace if you have multiple breach points, the liner is 304-grade and showing widespread corrosion, or the original installation was undersized for your appliance. Our camera inspection shows you exactly what we’re seeing. We don’t recommend replacement unless the photos justify it. Call for a free second opinion if another company told you the liner is shot.
For caps and exterior components, yes. Gelco and Copperfield both produce caps in black, copper, and stainless finishes that match or exceed Olympia’s original powder coat. For masonry repairs, we source brick from Queens-area suppliers to match Flushing’s common red and brown clay brick, and we tint our mortar to blend. The repair won’t scream “patched.” We show you samples before we start.
Once a year if you burn wood regularly, per NFPA 211. In Flushing, where coastal moisture and freeze-thaw cycles accelerate masonry and metal fatigue, every twelve months is prudent even for gas appliances with Olympia Chimney venting. An annual Level-2 inspection catches pinholing, cap rust, and crown cracks before they turn into water damage or carbon monoxide leaks. Our $89 Seasonal Tune-Up includes the camera inspection and a sweep. Call (516) 206-6672 to schedule.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Flushing and nearby areas.